Have a decade under my belt but a new situation. About 10% of the time firing my newer reload subs, my PS90 separates itself. Doesn't go all the way off, but the dis-assembly button has well cleared the recess. Magazine still fully latched on. Normally in my experience the magazine pops up, even with the elite ammo latch sping. Starting to wonder if my receiver might be getting fubared OR screws need to be tightened.
EDIT: Just remember the two didn't completely separate because a wire connecting the laser pointer was velcroed between the two items. THat wire has since broken.
EDIT 2: Just found Jay's vid on the PS-90 stock primary failure point. Took a look and sure enough some material starting to wear out. 40 gr rounds are find but the 55 gr pop it out. So looks like supers for me for awhile AND in the market for a new stock.
PS90
sbr-ed
suppressor equipped
been fired ALOT
Elite Ammo magazine latch spring
55 gr over 2.5 gr Trail Boss
PS90 sbr upper/lower separating when firing subs
Re: PS90 sbr upper/lower separating when firing subs
What velocity are you getting out of those subs with 2.5gr of TB?
Re: PS90 sbr upper/lower separating when firing subs
What velocity are you getting out of those subs with 2.5gr of TB?
Re: PS90 sbr upper/lower separating when firing subs
Doing about 1000 fps. Formula is from here and works well. Have discussed with you before. I think on FB.
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: PS90 sbr upper/lower separating when firing subs
Well here is the issue, after it happens the first time it will keep happening even with good loads.
Link to a video showing what has gone bad on your stock. https://youtu.be/k25SAf9D65U
Link to a video showing what has gone bad on your stock. https://youtu.be/k25SAf9D65U
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
- panzermk2
- Forum Supporter
- Posts: 12382
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: PS90 sbr upper/lower separating when firing subs
And this is the whole playlist,
PS90 and P90 Service and Inspection Series Elite Ammunition, https://youtube.com/playlist?list=PLu1o ... RIQ_WNBcRw
PS90 and P90 Service and Inspection Series Elite Ammunition, https://youtube.com/playlist?list=PLu1o ... RIQ_WNBcRw
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: PS90 sbr upper/lower separating when firing subs
Been awhile. Sure thing that is exactly happening to those paying attention. Jay I dropped you an email.
Who is online
Users browsing this forum: No registered users and 21 guests